Annexed Equipment for Molding Machine

These annexed equipment conforms for Automatic Feeding Table and Unload Table, has been designed to conform a line of continuous production. Its objective is to serve as nourishing automatic and receiving as pieces finished, which allows to optimize the process of production of moldings.

The Feeding Table is loaded in manual form, its size is possible to lodge a certain amount product of visual inspection and control to the process. Its design allows to generate a change in the sense of displacement of the profile, from one cross-sectional to one longitudinal, through rollers shippers located at the end of race of the transport chain, who press the molding and they give kinetic energy allowing the automatic loading to him of the molding machine.

The pressure of the rollers on the piece, can be fixed through a system screw crank that fits the level of fall of the shippers, these count on regulation in its horizontal direction to modify its position in case of different pieces.

The Unload Table receives the moldings in a longitudinal plane and it positions them in one cross-sectional one, later to make the process of selection and retirement of material.

This unloading is made in automatic form, moving on a row of aligned rollers the product. The crossing is executed when the molding arrives at the end of race and the gravity exerts its force positioning it in a plate where it slides and is recepcionada by the operator for its packing.